Screenwriting

Screenplay Format Basics: Elements, Fonts and Common Mistakes

You have a story for the screen, and then you open a blank page and wonder where the character names go. Screenplay format looks fussy, but it is six elements and a few conventions, and once you have seen a scene laid out you can write one. Here is the layout, a worked example and the mistakes to avoid.

Language

The six elements

Every screenplay is built from the same few pieces. Learn these and you can read any script.

  • Scene heading (also called a slugline): says where and when. It starts with INT. (inside) or EXT. (outside), then the location, then the time of day, such as INT. KITCHEN - MORNING.
  • Action: what we see and hear, in present tense. 'Dee wipes the counter. It is already clean.'
  • Character cue: the speaker's name in capitals, placed above their lines.
  • Parenthetical: a short note on how a line is said, in brackets under the character name. Use rarely.
  • Dialogue: what the character says, below the cue.
  • Transition: an instruction such as CUT TO: or FADE OUT. Most modern scripts use few of these, and often only at the end.

A correctly formatted example

Below is a short scene, shown in plain text. Real screenwriting software supplies the indents, so the lines here are flush left. This is also how the scene would look in Fountain, which comes up shortly.

INT. ROUTE 9 BUS - NIGHT

Rain on the windows. The bus is nearly empty. DEE (60s, hospital cleaner's uniform) sits at the back with a paper bag on her lap.

A BOY (10) climbs on alone. The driver does not look up. The boy walks down the aisle and stops at Dee's row.

BOY

Is this seat taken?

DEE

(not looking up)

Every seat's taken. Nobody's in them yet.

He sits anyway. She slides the paper bag between them.

DEE

There's a sandwich in there. It's not mine.

BOY

Whose is it?

DEE

Whoever can tell me where they're going.

The bus brakes at a stop where no one waits. The boy watches the empty shelter.

BOY

Last stop.

DEE

Then you've got a long time to think of a better answer.

CUT TO:

Scene headings and action in practice

Scene headings do more than label a place. They tell the reader that time or location has changed, so use a new one when either does. A short continuation in the same place, such as following a character from a room into the hall, can be written as INT. HALLWAY - CONTINUOUS. If you cannot tell whether you need a new heading, ask whether a viewer would feel that the scene had shifted.

Action lines are where beginners overwrite. Compare two versions of the same moment.

Overwritten: 'Dee, a weary woman who has spent forty years scrubbing floors and carries the weight of every night shift in her shoulders, slowly sits down as the old bus groans and rattles through the downpour.'

Tighter: 'Dee lowers herself into the seat. The bus rattles through the rain.'

The second version gives the actor and the director what they can use. Her history can come out in dialogue or in a prop, such as a hospital badge on a lanyard. When you introduce a character in capitals for the first time, add an age and one or two details a casting director could picture, then stop.

Fonts, margins and page count

The convention is a 12-point Courier-style font, because a monospaced font makes every page take roughly the same room. Pages are US Letter in the US industry, with a left margin around one and a half inches and the other margins around one inch. Dialogue sits indented inside the page, and character names are indented further. You rarely set any of this by hand, because screenwriting software handles it.

A rule of thumb is that one page equals about one minute of screen time, so a 100-page script runs around 100 minutes. It is a rule of thumb, not a law. A page of dense action can play faster, a page of quiet looks can play longer, and a long dialogue scene can run the other way. Use it to sense the shape of your script, not to cut scenes.

Common beginner mistakes

Most of these come from trying to direct the film on the page. A script is a blueprint that other people read before anyone builds anything.

  • Camera directions. Writing 'CLOSE ON' or 'PAN TO' in every scene takes over the director's job. Write what we see, and let the cut come from the writing.
  • Long action blocks. More than four or five lines of action in a row is a wall. Break it up with white space and keep to what can be seen or heard.
  • Too many parentheticals. If you need one on every line, the dialogue is not doing its work. Keep them for moments where the meaning would otherwise be missed.
  • Describing thoughts. 'She remembers her father' cannot be filmed. Show an object, a look or a line that suggests it.
  • Over-using transitions. A CUT TO: after every scene is noise. Leave them out unless the cut itself matters.
  • Naming every extra. A script with forty named characters is hard to follow. Name those who speak or matter.

Fountain: screenplays in plain text

Fountain is a plain-text markup format for screenplays. You type in any text editor and apps convert the result into properly formatted pages. A scene heading beginning with INT. or EXT. is recognized automatically. A line in capitals followed directly by dialogue becomes a character cue. A line in brackets under a name becomes a parenthetical. A line in capitals ending in TO: becomes a transition.

Where a line would be misread, you can force its type with a symbol, for example a full stop before a line to make it a scene heading. Files are plain text, so they open anywhere and survive any software change. Many screenwriting tools can import and export Fountain, which makes it a handy way to carry a script between programs.

Why format matters to readers

Format is not decoration. A professional reader may go through many scripts in a week, and a familiar layout lets them read fast and focus on the story. Wide margins and short action blocks make a script quick to skim. A script that ignores the conventions signals that the writer has not read many scripts, and the story gets less benefit of the doubt.

Good format also protects your own reading. When every element sits in its usual place, problems such as an overlong scene or a character who never speaks become visible.

Write the draft first

A last, honest word. Do not let format stop you from writing. The first draft is where you find out what happens, and no reader will see it. Type scenes in whatever shape comes, as long as you can tell who is speaking, then tidy the format when you revise. A badly laid-out script with a strong story can be fixed in an afternoon. A perfectly formatted script that was never finished cannot be fixed at all.

When you are ready to format, use software that does it for you. SagaFold has a screenplay format with Final Draft export, so you can write in the standard layout and send the file onward.